The cycle delay, is the elapsed time starting from when your cat exits the globe until the unit starts a Clean cycle. It can be set for 3, 7, 15, 25, or 30 minutes. The default cycle delay is 7 minutes. 

This feature is also available in the Whisker app.

You can reduce the cycle delay if it is important to minimize odor and/or the time that waste is available to other pets, such as dogs. 

However, reducing the cycle delay may reduce the cleaning effectiveness if clumps do not have enough time to set, or clump. Extend the cycle delay when using a lower-quality clumping litter that needs more time to set. 

Settings

A 3-second long press of the Empty button enters or exits cycle delay setting mode.

The light bar will indicate the current cycle delay setting.

Subsequent short presses of the Empty button will toggle through the available settings 

• 1 green light equals 3 minutes
• 2 green lights equals 7 minutes 
• 3 green lights equals 15 minutes
• 4 green lights equals 25 minutes 
• 5 green lights equals 30 minutes

After selecting the preferred setting, a 3-second long press of the Empty button will save the setting.

The  cycle delay is the elapsed time starting from when your cat exits the globe until the unit starts a Clean cycle. It can be set for 3, 7, 15, 25, or 30 minutes. The default cycle delay is 7 minutes.

Need Technical Support?

Our Troubleshooting Wizard will solve most issues and is the fastest way to get help.

Troubleshooting Wizard