To onboard your Litter-Robot 3 (serial numbers LR3CI or LR3C if connection via your device's bluetooth is unsuccessful) in the Whisker App, you will be prompted to connect your phone to the Litter-Robot hotspot. Note: If your serial number begins with LR4C or RF1C you will onboard via your device's bluetooth, not via the Litter-Robot hotspot.

Selecting Litter-Robot WiFi

1. Minimize the Whisker app
2. Open your phone's settings
3. Tap Connections or WiFi
4. Look for Litter-Robot SSID (may need to scroll down)
5. Tap Litter-Robot
6. Input the password neverscoop
7. Allow the device to establish a connection; the WiFi signal should be visible on the top left of the screen
8. Return to the Whisker app
9. Follow the prompts in the app

If you see 'Litter-Robot SSID not found':

• Make sure that the Litter-Robot is in onboarding mode. The power button should be illuminated solid blue.
• WiFi must be enabled on your mobile device.
• You must be next to the Litter-Robot to ensure your mobile device can see it.

Questions? Visit whiskersupport.com